Dwyer GDL-T Manual de usuario Pagina 21
- Pagina / 33
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
DwyerLog User’s Guide Version 1.4x 21/33
MTL-30 Specifications
Sample Point Capacity
43,344 points for temperature only. 21,672 points for temperature, humidity
and dew point.
Alarms
Visual over and under alarm indicator for temperature and humidity. Dew
point alarms are not available
Calibration
User single point offset calibration is available through software for both
temperature and humidity. Calibration is password protected.
Operating Temperature
-35°F to 160°F (-31°C to 70°C)*
Storage Temperature
-40°F to 170°F (-40°C to 77°C)
Time Accuracy
+/-100ppm @75°F
Relative Humidity Range
0% to 99%RH, non condensing.
Relative Humidity Accuracy
+/- 2%RH, from 10% to 90% RH
Relative Humidity Resolution
0.01%RH
Temperature Accuracy
+/-1°F (0.5°C)
Temperature Resolution
0.01°F or 0.01°C
Dimensions
3’’ x 1.6" x 0.6’’ (7.6cm x 4.0cm x 1.5cm)
Weight
1.0 oz (23g)
Power Source
3V CR2032 Lithium coin cell battery (Included)
Battery Life (average use)
6 Years
* Lithium batteries do not perform well in very low temperatures. If the logger is going to be used in temperatures
below 32°F (0°C), make sure to start with a fresh battery, and check the battery level often.
MTL-20 Temperature Logger
The MTL-20 is a self-contained, precision instrument for recording the temperature of the surrounding environment.
The MTL-20 can store up to 43,344 temperature samples.
MTL-20 Logger Status LED
Pressing the Start/Check button makes the LED flash a series of flashes to indicate the logger status. The table
below shows the different logger states that the status light can show.
Status Light
Logger State
Flashed Green one time
Logging is not in progress. Data in memory did not exceed the alarm
thresholds.
Flashed Red one time
Logging is not in progress. Data in memory exceeded one of the alarm
thresholds.
Flashed Green four times
Logging is in progress. Data in memory did not exceed the alarm thresholds
Flashed Red four times
Logging is in progress. Data in memory exceeded one of the alarm
thresholds
Flashed Green-Red three times
Delayed logging. Logging will start at the user specified time.
Replacing the MTL-20 Battery
The battery level of the MTL-20 can be checked using the DwyerLog software, by opening the Logger Status
window. It is suggested that the battery is replaced when the battery level reaches yellow. When the battery level
reaches red, it is imperative that the battery is replaced as soon as possible. When the battery level is too low, the
logger will stop logging automatically, resulting in data not being recorded. The DwyerLog software will give you a
- DwyerLog Logger Interface 1
- Software 1
- Quick Start 4
- Overview 4
- Custom Interval Setup 6
- Alarm Setup 6
- Alarm Status Pane 8
- Ending the Logging Session 9
- Powering Down the Logger 9
- Loading Logger Data 9
- Automatic Data Retrieval 10
- Working With the Data Graph 11
- Using the Zoom Feature 12
- Data Listing Window 13
- Data Summary and Statistics 13
- Using the Data Filter 14
- Exporting Logger Data 15
- Hiding or Viewing Channels 15
- Printing the Logger Data 16
- Calibrating the Logger 16
- Data Security 18
- Specifications 19
- MTL-30 Logger Status LED 19
- Replacing the MTL-30 Battery 20
- MTL-30 Specifications 21
- MTL-20 Temperature Logger 21
- MTL-20 Logger Status LED 21
- Replacing the MTL-20 Battery 21
- MTL-20 Specifications 22
- Turning the GDL On and Off 23
- GDL Sample Screen 23
- The GDL Summary Screen 24
- GDL Graph Screen 25
- GDL Buttons 25
- Replacing the GDL Battery 26
- GDL Specifications 27
- Turning the GDL-T On and Off 27
- GDL-T Sample Screen 28
- GDL-T Difference Screen 29
- GDL-T Summary Screen 29
- GDL-T Graph Screen 30
- GDL-T Buttons 30
- Replacing the GDL-T Battery 31
- GDL-T Specifications 31
- MTL-LCD Loggers with Display 31
- MTL-LCD Display and Button 32
- MTL-20-LCD Specifications 33
- MTL-30-LCD Specifications 33
Relacionado con productos y manuales para Sensores Dwyer GDL-T
Sensores Dwyer DW-USB-RT Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer DW-USB-LCD Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer DW-USB-1-HT Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer DW-DATAPAD Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer BDL Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer DL-8T Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer DL8 Manual de usuario
(12 paginas)
(12 paginas)
Sensores Dwyer DLI-P Manual de usuario
(38 paginas)
(38 paginas)
Sensores Dwyer DLI-H Manual de usuario
(38 paginas)
(38 paginas)
Sensores Dwyer DLI-R Manual de usuario
(38 paginas)
(38 paginas)
Sensores Dwyer HTDL-10 Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer STDL-10 Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer TDL-10 Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer LDL-030 Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer LDL2-030 Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer DLP Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer ISDL Manual de usuario
(2 paginas)
(2 paginas)
Sensores Dwyer HTDL-30 Manual de usuario
(1 paginas)
(1 paginas)
Sensores Dwyer DLI-T Manual de usuario
(38 paginas)
(38 paginas)
Sensores Dwyer DW-WIFI Manual de usuario
(2 paginas)
(2 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.057 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales